This is a summary of standard dimensions for Australian kitchens. Having standard dimensions certainly makes life easier for beginners and kitchen designers alike!
The standard baseboard height is 150 mm.. The height range can be between 100mm and 200mm. The depth of the plinth (from the front of the cabinet frame to the floor, excluding the door) is 50 mm. (See Fig. 1)
Standard kitchen counter height
Recommended standard kitchen counter height is 900mm (+/- 20mm). This is the distance between the finished floor and the top of the bench. However, the working table height can be in the range of 850mm to 1050mm. (See Fig. 2)
Ideal desk height
The ideal bench height (relative to your own height) is just below your elbow!
A good rule of thumb for finding your ideal workbench height is to make a fist and place it under your bent elbow. The lowest part of the handle is the ideal worktable height!
The most common depth for work tables in Australia today is 600mm deep. (Older kitchens usually have a standard depth of 450mm).
Standard table depths for breakfast bars
- 300 mm
- 450 mm
- 600 mm
Standard countertop depths for kitchen islands
- 600 mm
- 750 mm
- 900 mm
- 1200 mm
The protrusion of the edge of the table is 20 mm from the front face (door/drawer) of the floor cabinet.
Standard table thickness
The most common countertop material is laminate and its standard thickness is 33mm.. It is made of 32 mm thick MDF or chipboard and a 0.8 mm thick piece of glued laminate.
Obviously, the thickness of the worktable varies, as it depends on the type of material used. Other tabletop materials include granite, limestone, or engineered stones like Caesarstone. They are generally 20mm thick slabs and for thicker tops the edge is built with 20mm more.
- Laminated top thickness = 33mm
- Thickness of granite/limestone = 20mm (or 40mm with false edge)
- Caesarstone (engineered stone) = 20mm (or 40mm with built-in edge)
You need to be careful when working with kitchen worktop heights around 1050mm high. Appliances like dishwashers will end up having a lot of space between them and the work table. You can increase the height of the dishwasher by placing a drawer underneath or placing a drawer on top.
Standard height of floor cabinet
The standard height of the floor cabinet is 720 mm (+1/-4 mm). This does not include the surfboard. Ideally, the depth of the cabinet from the floor should not exceed 600 mm (handles excluded). Standard depth of floor cabinet is 580mm including door thickness.
Standard dimensions for standard or DIY base (floor) cabinets are 720 mm high by 560 mm deep (without door). Floor cabinet widths generally increase in 100 or 150 mm increments (see Fig. 3).
The maximum door width for a base cabinet is 600 mm. This is due to the loading of the weight of the door on the door hinges. If the door were wider, the doors would tend to sag under the weight. You can fix this by placing two hinges on top of the door (one hinge below the other).
Standard dimensions for stock/DIY floor cabinets
Dimensions below do not include door.
- 300mm wide x 720mm high x 560mm deep (1 door)
- 450mm wide x 720mm high x 560mm deep (1 door)
- 600mm wide x 720mm high x 560mm deep (1 door or 2 doors)
- 750mm wide x 720mm high x 560mm deep (2 doors)
- 900mm wide x 720mm high x 560mm deep (2 doors)
- 1050mm wide x 720mm high x 560mm deep (2 doors)
- 1200mm ancho x 720mm alto x 560mm fondo (2 portas)
Standard kitchen door opening size
The standard kitchen door opening size (distance between doors) is 3mm.
For example: If a single door cabinet is 500 mm wide, the door width will be 497 mm (500-3 mm).
If a two-door cabinet is 900 mm wide, the door width is 447 mm ((900-6 mm)/2).
The door clearance between the bottom of the work table and the top of the cabinet door is also 3 mm.
Standard dimensions for stock/DIY wall cabinets
Standard wall cabinet height is 720 mm (+1/-4 mm). Ideally, the depth of the wall cabinet should not exceed 350 mm (handles excluded). There must be a minimum clearance of 280 mm at the rear of the cabinet. Personally, I prefer a minimum clearance of 300mm to be able to store large diameter boards easily.
Standard dimensions for stock or DIY wall cabinets are 720mm high by 300mm deep (without the door). As for floor cupboards, wall cupboard widths usually increase in 100 mm or 150 mm increments (see Fig. 4).
Dimensions below do not include door.
- 300mm wide x 720mm high x 300mm deep (1 door)
- 450mm wide x 720mm high x 300mm deep (1 door)
- 600mm wide x 720mm high x 300mm deep (1 door or 2 doors)
- 750mm wide x 720mm high x 300mm deep (2 doors)
- 900mm wide x 720mm high x 300mm deep (2 doors)
- 1050mm wide x 720mm high x 300mm deep (2 doors)
- 1200mm ancho x 720mm alto x 300mm fondo (2 portas)
Standard tall cabinet height
Standard high cabinet height (pantry, wall oven, etc.) is 2073 mm (+/- 20 mm)). See figure 5. The height is determined by adding the height of the floor cabinet, the thickness of the work table, the height of the splashback and the height of the wall cabinet (720 mm + 33 mm + 600 mm + 720 mm = 2073 mm +/- 20mm). The standard depth of the tall cabinet is 600 mm.
standard kitchen height
Standard kitchen height is 2223 mm (+/- 20 mm). The height is determined by adding the baseboard height, floor unit height, worktable thickness, backsplash height, and wall unit height:
150 mm + 720 mm + 33 mm + 600 mm + 720 mm = 2223 mm +/- 20 mm. (Ver figura 5)
Backsplash height (on wall cabinets)
The standard kitchen backsplash height is 600 mm.. The minimum height of the dashboard is 450 mm. If you have a wall unit over a sink, there must be a minimum splash height of 600mm between the top of the sink and the bottom of the wall unit.
Height of hood above gas stove
The minimum height of the extractor hood above a gas stove is 650 mm.. Most manufacturers recommend a minimum height of 700mm to 750mm.
Standard fridge space is 900mm wide x 1800mm high x 600mm deep.
A long time ago, it used to be a commonly accepted practice in the Australian kitchen industry to leave a standard refrigeration space of 1800mm high x 900mm wide x 600mm deep.
This "standard fridge space" would accommodate most types of top mounted fridges available in Australia, as this was the most popular type of fridge at the time.
Unfortunately there is no such thing as astandard fridge size.
Standard Oven/Wall Oven Dimensions
Standard countertop oven size is 600mm wide x 600mm high. The countertop oven can be used as a built-in oven (and vice versa). Pizza oven types are usually 900mm wide x 600mm high.
Wall oven dimensions are typically 600 mm wide x 600 mm high or 600 mm wide x 900 mm high. Occasionally, wall ovens can be 900 mm wide x 600 mm high (eg pizza ovens).
Freestanding oven dimensions
Standard sizes of cookware such as freestanding ovens or ranges (gas or electric) come in five standard widths.
- 540 mm
- 600 mm
- 750 mm
- 900 mm
- 1200 mm
These are nominal dimensions (i.e. not exact but very close) as different appliance manufacturers have different standards.
Standard dishwasher dimensions
Standard dishwasher dimensions are 598mm wide x 600mm deep x 820mm to 870mm high(using height adjustable feet).
Standard dishwasher cavity dimensions are 600 mm wide x 600 mm deep x 870 mm high.
Having standardized dimensions certainly makes life easier for kitchen designers, as it provides a solid and workable framework for developing an efficient and safe design.
However, there are other rules that are vitally important to understand when designing a kitchen. These standards are very important as they are issued by a professional or government regulatory authority and certain rules must be followed. Follow the link for more information aboutAustralian culinary standardsand how they play an important role in the culinary industry.
The typical size for an Australian kitchen is 4.2m x 3.4m, with the layout generally determined by the room's form and whether there is enough space.What is the standard kitchen height Australia? ›
The recommended standard kitchen benchtop height is 900mm. This is the distance between the finished floor and the top of the benchtop. If tall genes run in your family #michaeljordan you may want to adjust the working bench height, just so long as it's within 850mm to 1050mm.What is the standard depth of kitchen cabinets Australia? ›
The industry standard kitchen cabinet depth is 600mm (from front to back) however this is often too tight to accommodate certain kitchen fittings. At Premier Kitchens we have increased our cabinet depth by 50mm to allow for modern day sinks and tapware that require more room.What is the standard kitchen bench width Australia? ›
The standard width in Australia for a wall or under bench oven is 600mm. There are also larger standard size options which are 700mm and 900mm. Some standard sizes for freestanding ovens are 540mm, 600mm, 900mm and 1200mm.What is a good size for AU shaped kitchen? ›
What room size is good for a U-shaped kitchen? Kitchens in the U-shape should be around 107 ft2 | 10 m2 in size. The widths of U-Shape Kitchen layouts typically range from 9′-12′ | 2.7-3.7 m, with depths varying as needed.How much space do you need for AU shaped kitchen? ›
For example, in smaller kitchens the U-Shaped design usually has between 42” to 48” of aisles space between the two facing walls. This allows the primary cook to function in the kitchen and maximize on the area's efficiency, storage and countertop surface since everything is within one or two steps of reach.What width is a galley kitchen Australia? ›
Galley Kitchen Layouts
To optimise the flow of this layout, both sides of the kitchen are usually between 1200 to 1800mm apart, providing ample space to move and open cupboards and appliances with ease. You'll find this layout offers you greater flexibility when considering where to place your appliances.
BD-089 : Cabinets in the built-in environment.What are the dimensions of a sink in Australia? ›
Sinks come in all shapes and sizes. For a double sink allow for a length of around 800mm and a width of 480mm plus a drainage area on the benchtop. The depth of the sink is around 200mm. If you wish to plan your kitchen sink with a single bowl allow for a length of 550mm and a width of around 500mm.How deep should an overhead cupboard be Australia? ›
The standard size for an island bench is 900mm deep, this allows for 600mm deep cabinetry and a 300mm over hang for seating. If the overhang is more than 300mm it does require additional support! Ideally, we would also allow a 600mm width per person for maximum comfort.
The height of standard kitchen cabinetry is 2070mm that can be 5mm plus or minus. This covers the space between the benchtop and the bottom of the wall cabinets – 450mm. Standard wall cabinets are 720mm high and floor cabinets are generally 720mm high.What are kitchen cabinets made of Australia? ›
Most cabinet makers in Australia use MDF for kitchen carcasses because itâ€™s cheap, stable and easy to work. Even high end kitchens are often MDF under a fancy veneer. MDF attracts consumers because of its resistance to cracking and peeling â€” meaning itâ€™s super easy to paint over.How wide should au shaped kitchen with island be? ›
Without this feature, the two "legs" of the U may be too far apart to be practical. And while it's possible to have a U shape in a smaller kitchen, for it to be most efficient, the U-shaped kitchen needs to be at least 10 feet wide.What is the standard splashback height in Australia? ›
The Australian Standard for the height of the splashback behind an electric or induction cooktop is 600mm.
180 to 440 Square Feet: is the range of kitchen size options you'll often see in new home designs. 225 Square Feet: a figure from Pi Consulting this is more in line with the overall national average for kitchen size as it relates to the average home size.What is a typical U-shaped kitchen layout? ›
A U-shaped kitchen is a common layout that features built-in cabinetry, countertops and appliances on three sides, with a fourth side left open or featuring a cased opening or entry door. In larger spaces with enough width, U-shaped kitchens are often outfitted with a freestanding island or seating.Is a 10x10 kitchen small? ›
The 10x10 represents the square footage of a kitchen, 100 square feet in total—the size of most small to average kitchen layouts.How wide are kitchen cabinets Australia? ›
Standard dimensions for stock or DIY base (floor) cabinets are 720mm high by 560mm deep (without the door). Floor cabinet widths generally increase by 100 or 150mm increments (See Fig. 3). The maximum door width for a base cabinet is 600mm.How is au shaped kitchen determined? ›
A u-shaped kitchen layout has 3 connected sides that form a “u” or horseshoe shape. This layout provides an open feel, allowing you easy access from the wide open end and plenty of freedom to move around and work in the middle space.How do you maximize an U-shaped kitchen? ›
Light & Bright. Since U-shaped kitchens are often closed in by two walls, ample light can make a not-so-open kitchen feel more spacious. A brighter space can be achieved by well-placed lighting or with natural light streaming in from large windows, like the solution implemented in this kitchen.
The general rule is that you will need at least 42 to 48 inches (106.68 cm to 121.92 cm) of open space around your island. Another life-saving guideline: if your kitchen is less than 13 feet wide, we don't recommend adding an island at all.What is the minimum width of a kitchen? ›
Not enough space can make it difficult for you to move around. A kitchen's minimum aisle width should be at least 1,020 mm and can go upto 1,200 mm.What is a good size for a galley kitchen? ›
By definition, a galley kitchen consists of two parallel sides with a narrow passage in between. A galley kitchen layout works best for small kitchens—less than 90 square feet. Four to 6 feet between parallel sides maximize efficiency and workflow.What is Australian Standard 3.2 3? ›
Standard 3.2. 3 Food Premises and Equipment sets out the requirements for food premises, fixtures, fittings, equipment and food transport vehicles, to minimise the risk of food contamination. If food businesses comply with these requirements they will find it easier to meet the food safety requirements of Standard 3.2.What is the Australian standard code for domestic kitchen assemblies installation? ›
|Title||Domestic kitchen assemblies - Installation|
|Committee||BD-089 (Cabinets in the built-in environment)|
First published as AS/NZS 4386.1:1996. 1 SCOPE This Standard specifies the minimum requirements for the construction, durability, safety, ergonomics, strength, coordination of services and choice of components of fitted kitchen assemblies for use in domestic applications.How big is a kitchen sink Australia? ›
Sinks come in all shapes and sizes. For a double sink allow for a length of around 800mm and a width of 480mm plus drainage area on the benchtop. The depth of the sink is around 200mm. If you wish to plan your kitchen sink with a single bowl allow for a length of 550mm and a width of around 500mm.How deep is a standard vanity Australia? ›
Bathroom vanity standard height ranges between 82 cm and 91 cm. There are some standardised dimensions for sinks and basins as well. Most vanity basins range from 50 cm to 58 cm, with 53 cm being the most common depth.Is water from bathroom sink same as kitchen Australia? ›
According to Hafren Dyfrdwy Limited (formerly Dee Valley Water Limited), the water in your bathroom taps has usually been stored in a tank in the loft. Hence, unlike the water in your kitchen tap, this water isn't fresh from the mains.How deep should pantry shelves be Australia? ›
Ideally, the pantry should be a natural extension of the kitchen. As a general guide, allow at least 600mm for benchtops and 300mm for pantry shelving.
The Pantry or Linen Cupboard 60cm measures 60cm Width x 44cm Depth x 210cm Height in dimensions.How high should a wall oven be Australia? ›
Reach range will vary between individuals, but between 230mm and 1350mm from ground height is recommended. Wall ovens will generally need to be installed at a slightly lower than normal height, within the users reach range.What is the best kitchen height? ›
Deciding your kitchentop height above or below 36” standard
The standard height should be between 38”-39” for people above-average height. 32” is good for below-average height people. In case of disabled people and wheelchair users, the height of countertop should be 31”-34”.
Microwave must be installed at a minimum height of 850mm above the floor. Built in installation only suitable in a tower due to ventilation requirements.How does cabinet work Australia? ›
The Cabinet is the focal point of the decision-making process of government. It is composed of either the full Ministry, or a specified group of Ministers selected by the Prime Minister.  The latter has been the practice of non-Labor Governments since 1956 and Labor Governments since 1983.Are Kaboodle kitchens made in Australia? ›
quality kitchens, made for Australians
Our offices and manufacturing facilities are located in Australia and across the globe, proudly employing hundreds of Australians who are passionate and dedicated to bringing you the very best in kitchen design, product and advice.
Hickory. Hickory is the most durable of the woods. You won't see nicks, cracks, or moisture damage on cabinets made from this hardwood. Hickory also has a decently wide color range.Is 36 inches enough space between counter and island? ›
Clearance Around the Island
You'll want to make sure people can easily walk around the island. The industry standard is to include 36 to-42 inches of walking space around the island. This space also ensures cabinet and appliance doors won't hit the island.
With a U-shaped kitchen you can create an excellent work triangle by placing your fridge, oven, and sink on their own side of the U. If possible, palace your refrigerator and sinks on the tips of your U so they don't disrupt your counter space.What are the requirements for a splashback Australian standards? ›
The installation of glass splashbacks is also covered in AS/NZS 5601 and it requires that glass used as a splashback adjacent to gas cooktops must be toughened safety glass a minimum 5mm thick and the glass must be marked 'toughened safety glass' to ensure that the glass is fit for purpose.
According to Australian regulations, the minimum clearance between a gas cooktop element or burner component is: 600mm of vertical clearance to a combustible surface, and 200mm of horizontal distance to a vertical surface.What is the average size of a kitchen splashback? ›
The standard kitchen splashback height is 600mm. The minimum splashback height is 450mm. If you have a wall unit over a sink, then there should be a minimum of 600mm splashback height between the top of the sink and the bottom of the wall unit.How wide does a kitchen need to be in Australia? ›
The typical size for an Australian kitchen is 4.2m x 3.4m, with the layout generally determined by the room's form and whether there is enough space.Is a 200 sq ft kitchen small? ›
Kitchens can be categorized into small, mid-sized and large kitchens. As highlighted above, small kitchens measure 70 square feet or less whereas midsized kitchen measure 100 square feet. Large kitchens measure around 200 square feet and above and all these are just estimated averages.Can you fit an island in a 12x12 kitchen? ›
The general rule is that you will need at least 42 to 48 inches (106.68 cm to 121.92 cm) of open space around your island. Another life-saving guideline: if your kitchen is less than 13 feet wide, we don't recommend adding an island at all.What is a typical U shaped kitchen layout? ›
A U-shaped kitchen is a common layout that features built-in cabinetry, countertops and appliances on three sides, with a fourth side left open or featuring a cased opening or entry door. In larger spaces with enough width, U-shaped kitchens are often outfitted with a freestanding island or seating.How do you plan an AU shaped kitchen? ›
- Go sleek with slab. U-shaped spaces often feature a lot of cabinetry, so opting for pared-back slab doors will provide a simple and open look. ...
- Streamline your space. ...
- Stick with shaker. ...
- Gleam with gloss. ...
- Muted and matt. ...
- Think minimal. ...
- Dial up on dark tones. ...
- Upgrade to grey.
Passageways through the kitchen should be at least 36 inches wide (or desirably larger if you're building an open floor plan kitchen). In work areas, walkways should be at least 42 inches wide for one cook or 48 inches for multiple cooks.What is perfect kitchen size? ›
It depends on the individual's needs and wants. But the standard kitchen size in India is about 8 feet x 10 feet which considers space for two people to move around and carry out their kitchen duties easily. Here we consider the clear distance to be 6 feet and the platform width to be 2 feet.How much does a 12x12 kitchen cost? ›
12x12 Kitchen Remodel Cost
This size gives you free rein to go for basically any type of renovation that you would like. Remodeling a kitchen of this size would cost between $14,000 and $36,000, based on square footage.
Galley Kitchen Layout
A galley kitchen lets you make optimal use of small spaces. Very often, there are no troublesome corner cabinets to configure, though that's not always the case.
If you have to cram a lot of units into a very small space, a U-shape layout is often the best bet. The downside of two corners is compensated by extra cupboard space on the end wall. 'The key to compact U-shaped kitchens is using every inch to your advantage.What is Australian Standard Code? ›
Australian Standards referenced in the BCA are mandatory documents. Australian Standards are published documents which set out specifications and procedures designed to ensure that a material, product, method or service is fit for its purpose and consistently performs the way it was intended.What Australian standard as is the recommended documentation for kitchen assemblies both manufacture and installation? ›
AS 4386.1 specifies the minimum requirements for the construction of kitchen assemblies used in domestic applications.How much space should be between cabinet and stove Australia? ›
Australian standards state that there needs to be a 50mm clearance to non-combustible surfaces (heat rated splashbacks) or a 200m clearance to combustible surfaces.