Free Shippingon all orders over $3,000.Start your free project today!
One of the most common home renovation projects is replacing kitchen cabinets to add value, design and style to your home. Such a project involves many tasks. Find the right cabinet design, move appliances to new locations, add cabinets to create more storage, create a kitchen island for a beautiful open concept, and more. In any case, it is important to know the standard sizes of kitchen cabinets to facilitate your kitchen renovation.
Before you start demolishing your existing kitchen, it is best to seek advicekitchen designeror even read about different kitchen design concepts and styles. It is important to do your research before making hasty decisions.
There are three types of standard kitchen cabinets
The first thing you need to understand is that there are three types of kitchen cabinets:base cabinets,closetsehigh cabinets🇧🇷 Low cabinets are those that stand on the floor, while wall cabinets, as the name suggests, are those that are attached to the walls, and tall cabinets are those that are often used as pantry cabinets. All three cabinet types are available in different widths and heights and are designed to fit perfectly into standard kitchen layouts.
Basic closet sizes
First, let's look at the sizes of base cabinets. These cabinets need to be very sturdy to form the base of your countertops. Base cabinets can have a single door, double doors, a set of drawers, or a combination of drawers and doors; It all depends on your design needs. The standard size of aBase cabinet is 34.5 inches highwithout the bank and36 inches with countertop.
The toe part, the bottom part of the closet that stands on the floor,measures 4.5 inches.
If the base cabinet has a drawer, this drawer is usually about 15 cm high, while theDoor height below is 24 inches🇧🇷 If the cabinet is a full-height base cabinet (one with only one door), this is itThe door is 30 cm high.
In terms of depth, a standard base cabinet is 24 inches deep. For islands or other areas where there isn't enough room for such a deep closet, the size is usually reduced by three inches at a time. The shallowest base cabinets are 12 inches deep (a wall cabinet is typically used to achieve this depth). The width can range from 9 inches wide to 36 inches wide.
Summary table for basic cabinet sizes:
| Height: | 34.5 inch without seat / 36 inch with seat |
| Depth: | 12 to 24 inches |
| Broad: | 9 to 36 inches |
Sizes of high quality wall or kitchen cabinets
These cabinets don't have to support as much weight since they don't have countertops, but they do need to be mounted properly to the walls to support the weight of plates and glasses. Closets come in a variety of sizes.
So what are the standard closet sizes for closets?When it comes to height, you have the choice between 30 inches, 36 inches or 42 inches. When installed over base cabinets, the top of wall cabinets are 84", 90" and 96" respectively.This leaves 18 inches of space between the base cabinets and the wall cabinets (after the countertops).
That might not sound like much, but remember that closets aren't that deep that there isn't much overhang. Generally, the standard kitchen cabinet depth to the wall is 12 inches, but some can be as deep as 24 inches. For example, wall cabinets designed to be installed above a refrigerator are deeper so that the front of the cabinet is flush with the front of the unit.
If you install wall cabinets in an empty room, on a desk, or in another area where you don't have base cabinets, you should hang them so that the bottom of the cabinet is 54 inches off the floor. This places the wall cabinets at the same height as if they were standing on a countertop (36" base cabinet + 18" space = 54").
Summary table for closet sizes:
| Height: | 30 inches to 42 inches depending on ceiling height and preference. |
| Depth: | 12 to 24 inches |
| Broad: | 9 to 36 inches |
tall cabinet sizes
Your tall cabinets are the towers of your kitchen. Tall cabinets are available in different heights, e.g84", 90" and 96" tall🇧🇷 How to combine your tall cabinets with the rest of your kitchen: yours84" tall cabinetwill match that30" closet, yourother 90" cabst will match that36" cabinet, and finally yours96" tall cabinetwill match that42" closet🇧🇷 As for depth, tall cabinets start at24" deep, Then what12"Options are always available for tighter spaces.
The tall cabinet family consists of pantry cabinets and oven cabinets.Pantry cabinets start at 12 inches wide and go up to 30 inches wide🇧🇷 Oven cabinets start at30" wide by 33" inches(33 inch is the most common oven cabinet, housing 90% of the ovens on the market).
When ordering an oven cabinet it is important that filler pieces are purchased to create the opening for your new oven; It helps to have that extra molding in case you make a mistake. Most oven cabinets have a single hole in the center for a single oven and three drawers underneath. To place a double oven, the two drawers must be removed and the frame modified.
Summary table for tall cabinet sizes:
| Height: | 84 inch, 90 inch and 96 inch |
| Depth: | 12 to 24 inches |
| Broad: | 12 to 33 inches |
Understand how to measure your kitchen
To get the right measurements for your kitchen cabinets, you need to know how to measure your space. This is especially important if one of your cabinets is custom made for your kitchen. In this case it may not be the standard size.
We've created a handy guide to help you get all the measurements you need before you start the rebuild.
Download our kitchen planning planner
How to determine the height of your upper cabinets
In order to determine the correct size of your upper cabinets, you must first measure the height of the ceiling. If you have an eight-foot ceiling and don't want your closets to take up all the space, use 30-inch closets. If you want your cabinets to reach the ceiling, just install 42 inch cabinets.
If you have moldings that you want to use on the ceiling, you need to leave room for them. For an 8-foot ceiling with a crown molding, you would probably use 36-inch tall cabinets. This will ensure that the molding is flush with the top of the cabinets and doesn't leave a gap between them. For those with higher ceilings, the cabinets having a 42 inch wall mount can be the best option.
FAQ on kitchen cabinet sizes
What is the standard size for high quality kitchen cabinets?
Mid wall or top kitchen cabinets are 30"-42" high, 12"-24" deep and 9"-36" wide.
What size sink fits in a 30 inch closet?
Depending on the type of sink, this can vary. If you want a built-in sink, it must fit in the 30-inch cabinet; You can choose between a 26" and a 28" sink.
Note: The cabinet walls are ½ inch each and the edge of the sink plus 1 inch.
For an inset sink, you can add a 30 inch sink.
What is the standard size of a microwave that fits over the stovetop and under overhead cabinets?
The standard size for long-range microwaves is less than 30 inches wide with a height of between 10 inches and 18 inches and a depth of 12 inches to about 18 inches.
Recommended kitchen cabinet items for you
- Discount kitchen cabinets
- kitchen layouts
- RTA kitchen cabinets
- What is a 10×10 kitchen?
- How much do kitchen cabinets cost?
- Discounts for kitchen furniture manufacturers
- How to assemble RTA cabinets
FAQs
Are all kitchen cabinets standard sizes? ›
Standard cabinet widths vary depending on the cabinet type. Upper kitchen cabinets are 12, 15, 18, 24, 27, 30, 33, and 36 inches. Upper filler cabinets are 3, 6, and 9 inches wide. Standard base cabinet widths are 12, 15, 18, 21, 24, 26.25, 27, 30, 33, 26, 39 and 42-inches.
What are standard upper cabinet dimensions? ›What is the standard size for upper kitchen Cabinets? The average wall or upper kitchen cabinets are 30”-42” in Height, 12”-24” in Depth, and 9”-36” in Width. What size sink fits in a 30-inch cabinet?
Do cabinet dimensions include doors? ›General Sizing Specifications
These depths are from the back of the cabinet to the front of the face frame and do not include the thickness of the door and drawer front.
Depth: A cabinet's depth is typically either 12 or 24 inches. The 24-inch depths are commonly used for base cabinets, while the 12-inch deep boxes are used for wall cabinets. A deep cabinet can be manufactured in shallower cabinets aren't work for your existing kitchen needs.
What is the most acceptable width of kitchen cabinet in a house? ›Kitchen Wall Cabinet Width
Wall cabinet widths run from 9 to 48 inches in 3-inch increments, though it is rare to install cabinets wider than 36 inches. Most common is the 30-inch side single-or double-door wall cabinet, which offers the best proportions for most storage needs.
Can You Just Replace the Cabinet Doors? You can definitely just replace cabinet doors. If you're up for a little bit of work with some basic tools, and maybe a spare set of hands to help, you can even do it yourself.
How does Home Depot measure kitchen cabinets? ›- For height: Measure from floor to right under the countertop. Right and left side height measures can vary. ...
- For width: Measure the width from left to right. ...
- For depth: Measure from the back to the front.
- Subtract the inches needed for plumbing or other the manufacturer's specifications.
The standard 10x10 cabinet collection often has 10-12 specifically sized cabinets in total, including base, wall, and tall cabinets plus accessories (toe kicks, etc.), most often to fit an L-shaped kitchen layout.
Should upper and lower cabinets be the same size? ›Not really – upper and lower cabinets in your kitchen don't always have to match. You have complete control over the appearance of your kitchen and cabinetry. Upper and base cabinets can match if you want them to. However, if you want to add variation to your space, they don't have to match.
What is the standard space between upper and lower kitchen cabinets? ›What Is the Standard Height for Upper Kitchen Cabinets? How high to hang kitchen cabinets is a personal preference, but most contractors agree that 18″ from countertop to the bottom of the cabinets is best. This is considered an ideal working space.
How do you determine cabinet size? ›
Measure the narrowest width, between your hinges, of the cabinet. If you only have one door or a center frame, measure from the hinge to the frame. Our units have drawers that will extend out of your cabinet. You will use the width dimension to determine which and how many units will fit side-by-side in your space.
What is a standard kitchen cabinet details? ›Standard kitchen base cabinet height with countertop: 35 to 36 inches. Standard kitchen base depth (front to wall) without countertop: 24 inches. Standard base cabinet depth with countertop: 25 to 26 inches. Standard base cabinet widths: 12, 18, 24, 30, 33, 36, and 48 inches.
Do all kitchen doors fit other cabinets? ›The first question that many people ask when they decide to choose replacement cupboard doors is “Can I use them with another manufacturers units?” The answer is yes!
How are kitchen cabinets measured? ›Measurements should be taken from wall edge to wall edge in order to get the total space. The measurements for openings like doors or windows are taken from one underside of trim to the other underside of trim. The trim or molding around it are not included in the measurement.
Why are Ikea base cabinets only 30? ›Since base cabinets occupy floor space, they effectively define the footprint of your kitchen. All base kitchen cabinets are 30 inches high. After adding the legs and toe kick, the total height becomes 34.5 inches. Adding a countertop brings the full height to 36 inches.
How many inches should cabinets be from countertop? ›The Standard Kitchen Cabinet Height
Past cabinets show that it is standard to install cabinets about 18 inches off the countertop, but it's becoming more popular to hang cabinets a bit higher for more space, such as 20 inches or more.
The best material for kitchen cabinetry is solid wood. However, solid wood contracts and expands, so we recommend choosing cabinets made of engineered wood. The best wood for kitchen wall cabinets is engineered wood because it's one of the most reliable materials. Also, it is less expensive than solid wood.
Are upper kitchen cabinets out of style? ›Upper cabinets are starting to disappear from kitchens, and I'm not sure how to feel about it. It all started with the open-shelving phenomenon, and now, in some cases, it has morphed into this total lack of anything structural above the countertops. On the one hand, it is visually beautiful.
What is the most common height of kitchen cabinets? ›For the cabinet box, the standard height is 34.5”. When combined with the countertop, the standard kitchen cabinet is 36” in height. Interesting Fact: Despite the average height for kitchen cabinets being 36”, the standard height for bathroom vanities is typically a bit lower at around 32”.
How much space do you need around kitchen cabinets? ›The recommended minimum width for walkways is 36 inches. Walkways can be as wide as you wish.
Is it cheaper to buy cabinets or make them? ›
While building your own cabinets saves about 66%, the cost of tools and time eats into this significantly for someone who is not an experienced woodworker.
What is the cheapest way to replace kitchen cabinets? ›Cabinets made of MDF, particle board, or other mixed synthetic materials are going to be much less expensive than lacquered cabinets or those made of solid wood or glass.
What is the average cost to replace kitchen cabinets? ›Cabinet Costs & Savings
Cabinet prices differ depending on the design and materials. The average cost per linear foot can be from $100 to $280, or $2,000 - $5,600 in total. Spruce reports that the national average cost to remodel a 10-foot by 10-foot kitchen can be as high as $26,000.
The 10x10 kitchen layout is a standard dimension that cabinet retailers use to help you estimate and compare the cost of new cabinets for your kitchen. The 10x10 represents the square footage of a kitchen, 100 square feet in total—the size of most small to average kitchen layouts.
What is the standard kitchen counter height and depth? ›And most people keep this standard height the same for their whole kitchen, regardless of the work they'll be doing on and around those surfaces. (Standard kitchen counter height and depth is generally 36″ high and 25″ deep.)
What is standard kitchen counter depth? ›Countertop depth standard measure is 25 ½ inches, though this varies based on appliance depths, room size, base cabinet size, and the backsplash details. Having a standard depth countertop helps maximize your space and enhances the look of your kitchen. Cabinet depth standard measure is 24 inches.
Is it cheaper to buy cabinets or have them built? ›While building your own cabinets saves about 66%, the cost of tools and time eats into this significantly for someone who is not an experienced woodworker.
How much does labor cost to install kitchen cabinets? ›Average labor cost
Including preparation and cleanup, the typical labor cost to install kitchen cabinets can range between $80 and $190 per cabinet, or $50 to $450 per linear foot. The installation price mostly varies depending on the type of cabinets involved and the professional you hire to do the job.
Average Kitchen Size In A Home
What is this? Most kitchens are around 10×10 in homes under 1500 sq ft. However, in homes larger than that, they are usually near 200 sq ft, or 12×15, give or take. Even in the largest homes though, a kitchen is rarely bigger than 20×20, or 400 sq ft.
Yup, they really are pretty significantly less expensive than other cabinet options, especially custom cabinets. But this will really depend on the size of your kitchen and the extra fixings you throw in.
What cabinets are easiest to keep clean? ›
An angled or bullnosed (rounded) outside edge, angled inside edge and flat panel are easiest to clean because there are less crevices to trap dirt, and dust can't settle easily on the vertical surfaces.
Are IKEA cabinets solid wood? ›Observers of IKEA kitchen cabinets like to point out that they are not real wood but rather are made from medium-density fiberboard (MDF).
What is best countertop height? ›For countertops, the established standard is for the top of the countertop to fall about 36 inches above the floor. So widely accepted is this standard is that base cabinet manufacturers build all their cabinets to a height of 34 1/2 inches, assuming an adequate toe kick and countertop thickness will be 1 1/2 inches.
What is normal kitchen counter width? ›Standard Countertop Width Measurements
The average kitchen countertop measures 25.5 inches wide (going from the wall to the counter's edge). Some measure up to 28 inches, but you usually won't find any wider than that. Standard measurements allow for a 1.5-inch overhang over 24-inch deep base cabinets.
The Standard Counter Height
Kitchen – The standard kitchen counter height is 36 inches (3 feet) above the floor. Kitchen islands designed for bar-style seating can climb as high as 42 inches.
Many experts suggest that any kitchen should have at least a minimum amount of 13 feet of countertop surface. Trying to squeeze more countertop than this into a small kitchen could rob the room of other features like a sink or stove large enough to meet your needs.
How high should kitchen cabinets be from countertop? ›The Standard Kitchen Cabinet Height
Past cabinets show that it is standard to install cabinets about 18 inches off the countertop, but it's becoming more popular to hang cabinets a bit higher for more space, such as 20 inches or more.
A standard countertop usually has an overhang of 1½ inches. Although some countertops may have a longer or shorter overhang, this number is generally the standard length for an overhang in homes. When utilizing an overhang for kitchen islands, the standard amount of overhang is typically 12 inches.